BSI Micro Floc 5L - Flocculant for pool water - Removes fine, non-filterable debris

What does BSI Micro Floc do?

When is this product suitable?

• at turbid, milky or dull pool water
• when the filter can no longer hold back fine pollution
• after hibernating the pool
• after a chlorine shock treatment
• as weekly support for pool maintenance

.When less suitable?

• Not intended as a replacement for disinfection (such as chlorine or active oxygen)
• Less suitable with cartridge or cartridge filters without the possibility of "waste" discharge
• Do not use with strongly deviating pH-value (first correct the pH)

Instructions for use

1. Add the appropriate amount of liquid Micro Floc to the inlet of the skimmer.
2. Let the water circulate for 10 to 12 hours.
3. If a slight haze develops on the pool walls, turn off the circulation pump.
4. Let the water rest overnight so the flocs settle to the bottom.
5. Remove the deposits the next morning with a bottom vacuum cleaner or through the filter mode "DRAIN" or "WASTE".
6. For a sand filter, check the pressure on the pressure gauge and flush the filter if necessary.

Dosage

• Weekly maintenance: 100 ml per 10 m³ of water
• Heavy fouling or after overwintering: 250 ml per 10 m³ of water

Safety information

• Keep out of reach of children
• Avoid contact with eyes; in case of contact, rinse thoroughly with water
• Use protective gloves and eye protection if necessary