Skip to main content Skip to search Skip to main navigation
Micro-floc-1L-slaat-niet-filterbare-fijne-organische-bevuiling-neer

BSI Micro Floc 1L - Flocculant for pool water - Removes fine, non-filterable debris

BSI Micro Floc 1L - Flocculant for pool ...

€9.50 €7.78
per unit

BSI Micro Floc 1L - Flocculant for pool water - Removes fine, non-filterable debris

Liquid flocculant that aggregates microscopic dirt particles so that they settle or can be removed by the filter.

Average rating of 0 out of 5 stars

(0)
BSI
Art. nr. 201614970
€9.50

€7.78 per unit (incl. vat)

Save 18%
Order before 14:00, shipped today
Enough supplies
  • Free delivery from € 50
  • Tailored advice from our experts
  • Pay safe online
Pay safe with

Product information "BSI Micro Floc 1L - Flocculant for pool water - Removes fine, non-filterable debris"

  • Dose: - Weekly maintenance: 100ml/10³ - Heavy soiling: 250ml/10m³
  • Flocculates fine and non-filterable contaminants
  • Improves filtration at sand filters
  • For pool and spa

What does BSI Micro Floc do?

BSI Micro Floc is a liquid flocculant for pool and spa water. The product causes very fine, suspended dirt particles - such as dead algae, dust, soot and sunscreen residue - to coalesce into larger flakes. These flocs are then held back by the filter or sink to the bottom, where they can be easily removed.

When is this product suitable?

Use BSI Micro Floc:
  • at turbid, milky or dull pool water
  • when the filter can no longer stop fine pollution
  • after hibernating the pool
  • after a chlorine shock treatment
  • as weekly support for pool maintenance
The product is particularly suitable for pools with a sand filter

.When less suitable?

  • Not intended as a replacement for disinfection (such as chlorine or active oxygen)
  • Less suitable with cartridge or cartridge filters without the possibility of "waste" discharge
  • Do not use with strongly deviating pH-value (first correct the pH)

Instructions for use

  1. Add the appropriate amount of liquid Micro Floc to the inlet of the skimmer.
  2. Let the water circulate for 10 to 12 hours.
  3. If a slight haze develops on the pool walls, turn off the circulation pump.
  4. Let the water rest overnight so the flocs settle to the bottom.
  5. Remove the deposits the next morning with a bottom vacuum cleaner or through the filter mode "DRAIN" or "WASTE".
  6. For a sand filter, check the pressure on the pressure gauge and flush the filter if necessary.

Dosage

  • Weekly maintenance: 100 ml per 10 m³ of water
  • Heavy fouling or after overwintering: 250 ml per 10 m³ of water

Safety information

  • Keep out of reach of children
  • Avoid contact with eyes; in case of contact, rinse thoroughly with water
  • Use protective gloves and eye protection if necessary


About BSI:
BSI is a major player in care and pest control products in numerous areas such as: insect and disease control, animal defense, fertilization, pet-care, pond and pool.

Product specifications

Contents in L: 1
Contents in ML: 1000
Effect: Water clarifying
Product group: Pool maintenance
Section: Swimming pools
Substance: Liquid
EAN: 5425001716296
Weight: 1.25 kg
Contents: 1 l
Package dimensions: 11L x 5.5W x 28.5H cm
Signal word: Warning
Warnings
(H phrases):
H319:
Causes serious eye irritation.
P264:
Wash … thoroughly after handling.
P280:
Wear protective gloves/protective clothing/eye protection/face protection.
Precautions
(P phrases):
P101:
If medical advice is needed, have product container or label at hand.
P102:
Keep out of reach of children.
P305+P351+P338:
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313:
If eye irritation persists: Get medical advice/attention.
P390:
Absorb spillage to prevent material damage.

Reviews

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.