Famiflora Starter kit for a clear pool

Thanks to this complete set, you will enjoy a clear pool for 4 to 8 weeks! So you can enjoy a fresh dip every time!

This kit contains:
- 1 x 2L Crystal Clear POOL 1
- 1 x 2L Crystal Clear POOL 2
- 1 kg chlorine tabs 20g
- 1 dosing float // float
- 1 jar of test strips
- 1 measuring cup
- Instructions for use

These products provide:
- Ensures a pool with crystal clear water
- Removes in an environmentally friendly way fine dirt, grease, skin flakes, sun creams, ...
- Makes the water soft (constant pH value)
- Reduces the use of chemicals
- Not agessive for heating elements, pumps, filters, jets, ozonators, ...

Starting treatment:
- Fill or refill pool with pure tap water
- Measure pH value and adjust as necessary to pH 7.2 - 7.6
- For every 1000L of water, add 50ml of Crystal Clear POOL 1 and then also add 50ml of Crystal Clear POOL 2. Add number 1 first, then number 2.
- Place 1 20 gam chlorine tablet per 1000L of water in the dosing float
- Operate the filter for 4 hours
Your pool is ready to use.

Weekly treatment:
- Add 100ml Crystal Clear SPA 1 + 100ml Crystal Clear SPA 2 weekly per 1000L of water
- Make sure the pumps are turned on and add number 1 first, then number 2.
- Place 2 20 gam chlorine tabs in the dosage float weekly
- With intensive use, measure pH and chlorine levels weekly and adjust if necessary
- Crystal Clear SPA is best added after bathing so that the filtration system has time to purify the water into crystal clear water.

When adding Crystal Clear SPA 1, there is a possibility that the water may become cloudy, this effect disappears after a few minutes when the pumps are turned on. The two products must be added separately!

Caution!Crystal Clear SPA is not a biocide and cannot be used as a water disinfectant, for this you must use an approved chlorine-containing product.