Intex cartridge filter pump C1500 5,678 L/h
For pools from 12,000 to 22,500 L
Product information "Intex cartridge filter pump C1500 5,678 L/h"
- Suitable for a swimming pool from 12,000 to 22,500 L
- Pump flow rate: 5,678 L/h
- System flow rate: 4,164 L/h
- Cartridge type A
- Hose connection: 38mm
- Contains: 2 hoses with hose clamps, inlet & outlet fittings and Hydro-Aeration set
- Voltage: 12 V
- Easy installation
Thanks to this Intex filter pump, your pool stays wonderfully clean. So you can enjoy a fresh dip every time! �🥽
The dirt remains in the filter cartridge and the clean water is pumped back into the pool. Besides clean & clear water, the filter pump also circulates the pool water, allowing the added maintenance products (chlorine, pH...) to do their job better. This makes your maintenance products last longer. This is also advantageous for your wallet. The filter is therefore the most important part of the pool!
✅ Ensures clean pool water
✅ Less maintenance products needed
✅ Suitable for medium to large pools
For which pool is this filter pump suitable?
This filter pump is suitable for pools from 12,000 to 22,500 L.
Do you choose an Intex pool? Then the following pools are compatible with this filter pump:
- Intex Easy Set round pools with Ø 549 cm
- Intex Frame round pools with Ø 549 cm, Ø 610 cm
- Intex Frame oval pools with Ø 503 cm, Ø 610 cm
The hose connection has a diameter of 38 mm. Does this not fit your pool? Then buy the Intex hose adapter B to so you can connect this filter pump without difficulty to your pool with connection of 32 mm.
Note: this pump is therefore not to use for pools larger than 22,500 liters. Before purchasing, check the capacity of your pool so you can buy a pump with the best preparation, so the swimming season does not fall into the water 😉
What is the capacity of this filter pump?
This pump has a capacity (pump flow rate) of 5.678 L/h.. Once you connect the pump to the pool, the pump begins to clean the water. Because of the water flow, the pump will lose power. This is called the system flow rate and amounts to 4.164 L/h. So the actual efficiency to filter the water is lower than the capacity of the filter pump. Keep this in mind when choosing a suitable filter pump for the content of your pool and the accessories you want to connect to it. Would you like to connect a solar mat or vacuum cleaner? Then you need to make sure your filter pump is definitely powerful enough to drive these accessories! So be sure to compare pump flow rate & system flow rate values.
What cartridges do I need?
A cartridge filter pump works with cartridge filters, also called cartridges. For this pump, you need type A cartridges.
How should I maintain the filter pump?
- rinse the filter every day and after each use with water with sufficient pressure
- replace the cartridges regularly so that the pump can optimally filter the water. How often you should replace the cartridges depends on how intensively the pool is used but we recommend replacing the cartridges every 2 weeks on average. Turn off the pump when replacing the cartridges.
What is the difference between a cartridge filter pump & a sand filter pump? And for which pool do I choose which pump?
A cartridge filter pump primarily holds back coarse dirt, while a sand filter pump purifies much more precisely. Cartridge filter pumps are therefore ideal for smaller & medium-sized pools that require less maintenance. Sand filter pumps keep medium to large pools clean.
🙋 Tips for a clean pool:
A pool not only provides cooling & fun but also requires maintenance. So keep a close eye on the pool values (pH, chlorine & alkaline) to enjoy your pool safely and as long as possible. Check out our wide range of maintenance products here.
Not sure how to make your
Product specifications
Maximum water capacity in liters: | 22500 |
---|---|
Product group: | Pool maintenance, Cartridge filter pumps |
Pump - Filter capacity in l/h: | 5678 |
Section: | Swimming pools |
Weight: | 10.79 kg |
Contents: | 1 pc |
Package dimensions: | 40L x 34W x 47H cm |
Reviews
Login