12V Wall Light Stanley

The 12V Stanley LED wall lamp of the brand Luxform concerns 1 lamp, so not a complete set. To connect this lamp you still need a transformer and main cable. In 3 steps, this is easy to select. 1) Choose the lamps that you want to use in your garden. 2) Choose the transformer: add up the wattage of the number of bulbs. Make sure the sum does not exceed the wattage of the transformer. You can choose from a transformer of 20W ( art. no. 9940), transformer 60W (art. no. 9941) and transformer 105W (art. no. 9942). 3) Choose the wiring. You always start with the 15m main cable (art. no. 9990). If this is not enough distance for you, you can extend this cable with our 10M extension cable (art. no. 9991). Connecting the lamps: If you have placed the transformer at a 230V power point, you can continue with the main cable from there. This is a thin cable that is easy to process in your garden or fence. Then you can use the simple easy twist connection system to the lamps at any desired point on the main cable. It couldn't be simpler! Usage tip: Beautiful wall light for placing on your facade or fence to illuminate your garden. The incredibly simple and safe 'Easy Twist & Turn' connection system from Luxform Lighting makes connecting garden lights child's play. Put the cords in the cable connector, turn it closed and there is light! Because of this simple connection you can also easily move the lamps at any time. It can not be more flexible. Luxform Lighting operates on 12 Volts low voltage and is therefore perfectly safe to work with. The low voltage makes the system absolutely safe for children and (digging) animals. The safe low-voltage cable can be laid above ground or directly under the surface. No trenching is required and you do not need any tools for installation.