EXIT energy-efficient pool heat pump 15m³ (3.7kW)

With the EXIT energy-efficient heat pump, you no longer take an ice-cold dip, but enjoy a lovely pre-heated pool!🏊
So you can extend the swimming season from April to September. The water can even be heated up to 40°C. That will be delicious splashing! In addition, the heater is very economical in use.

For which pool is this heat pump suitable?
The EXIT heat pump is suitable for above ground pools up to 15,000 L.

Which filter pump do I need?
This heater works perfectly in combination with a filter pump with capacity 2,006 L/h.

How does the heater work?
The heat pump converts outside air into heat and works from an outside temperature from 10 degrees. The generated heat is then used to heat the pool water to as much as 40 degrees. The EXIT heat pump is easy to connect to the pool and filter pump, as only two hoses need to be connected. One hose is connected to the filter pump and the other to the pool. The EXIT pool heat pump is easy to operate with a digital display on which you can set the water temperature. The pump turns off when the water has reached the set temperature and automatically starts running when the water falls below the set temperature again. This way, the pump uses energy only when necessary.

🙋‍♂️Tip by poolboy Marcel: to keep the pool water warm as long as possible, it is better to cover the pool in the evening with a tarpaulin or combine it with a solar cover.

Maintenance?
Is the swimming season over? Then make the pump water-free & dry, and store it indoors.

Would you like more info on pools?
Then take a look at our pool guide!